Whenever I speak to our customers who want to run our software on something more powerful than their desktop computers, I hear the need for quantitative proof of HPC benchmark tests. If you have the same need, you can now get that proof, and it won’t cost you a thing.
We’ve established a Free Performance Benchmark program. Instead of demonstrating evidence of the benefits of HPC on standard benchmark models, we want to show you the time savings that HPC can make possible for your very own model. Continue reading →
Some records are broken for glory, while others, like HPC, have more practical results. Compare 2017 Nathan’s Famous International Hot Dog Eating Contest champion Joey Chestnut’s record-breaking feat of eating 72 hot dogs (with buns) in 10 minutes during the annual July 4 contest to ANSYS, Saudi Aramco and King Abdullah University of Science and Technology (KAUST) shattering the supercomputing record by more than 5x. Chestnut was awarded the “Mustard Belt” for the 10th time, $10,000 and an additional 20,000+ calories for his impressive performance. By leveraging high performance computing, Saudi Aramco and KAUST worked with ANSYS to speed up a complex simulation of a separation vessel from several weeks to an overnight run! Continue reading →
ISC 2017 in Frankfurt, Germany (copyright Philip Loeper)
My visit to ISC High Performance last month in Frankfurt, Germany re-affirmed my belief that computing innovation shows no signs of slowing down. I participated in an industrial HPC user panel at the event, which has traditionally focused on big supercomputing solutions for government and research institutions. The fact that this year’s ISC broke attendance records and dedicated so much time to industry sessions shows how much HPC has become entrenched in other industries.
We have been working with Intel on a few innovations that I wasn’t at liberty to discuss at ISC, but can now share with you that Intel announced its new processors and improvements to their accompanying technologies yesterday. We have been working with Intel to benchmark ANSYS software on the new technologies before their release, so that our mutual customers can immediately see what benefits they’ll receive. Here’s a sneak peek at the results. Continue reading →
Many engineers are using powerful simulation software but are still not deploying HPC to the full extent. Case in point, I presume most of you have heard about the 24 Hours of Le Mans race. There is one starting June 17. I find it very exciting, not least because teams of three drivers per car compete to complete the most laps around the 13.629-km Circuit de la Sarthe in 24 hours! The race cars reach more than 320 km/h on the straightaway, spending most of the 24 hours at full throttle.
Imagine the roar of the engine drowning out the cheers of the crowds as you speed smoothly around the track in a finely tuned (thanks to simulation) race car. Now imagine the track is a country road or dirt road, not so smooth or speedy now, is it? Continue reading →
Some world records are the stuff of legend. The official land-speed record is 763 mph. The tallest man living measures 251 cm. The fastest ball bowled by any bowler is 100.23 mph and the heaviest vehicle pulled over a level, 100 ft course weighs 68,090 kg. Compared to these feats, records for supercomputing can seem a little flat. However, they are no less impressive and indeed, and stand to have a far greater impact on our day-to-day lives. Continue reading →
My colleagues Steve Del, Giovanni Petrone and I often discuss the benefits of moving engineering simulation to the cloud, marshalling greater computing resources and faster processing on high-performance computing (HPC) solutions. While most companies would find this compelling, budget-conscious companies are concerned about the costs. The missing piece is a pay-per-use simulation business model, where you use what you need, when you need it, and only pay for what you use.
It doesn’t matter what car you drive — it could be a snazzy Ferrari or a humble FIAT Punto — ultimately what we’re all looking for is a car that performs well and maybe saves us a little money at the pump.
The upcoming joint ANSYS-ESTECO webinar on September 15th will discuss just how important a single component, in this case, a tensioner arm, can be. Chain tensioner arms may not be as well known as pistons and gearboxes, but, by maintaining the correct amount of tension on the chain at all times throughout its duty cycle, they are important for reliable operation of the accessory chain drive system. The chain tensioner also helps protect other components, such as the alternator and water pump, from undue stress and premature failure. A well-designed chain tensioner can also help boost engine performance and efficiency. Continue reading →
Most simulation engineers with a hunger for high performance computing (HPC) have looked longingly to the cloud. Cloud computing has the potential to provide virtually unlimited access to HPC, enabling larger simulations and more design variations to be done in less time, since many machines working in parallel can solve even very large problems quickly. While the cloud offers much more than unlimited computing power, it’s those HPC resources that provide the strongest pull to the cloud. The question we seek to answer here is, “is it possible to get cloud-based HPC at very low cost?” Continue reading →
Manufacturers are under intense pressure to create and introduce new products on a consistent basis in order to remain competitive. Those that can conceive, develop, test and bring products to market quickly stand to realize improvements to overall business performance and profitability.
Computer-aided engineering (CAE) streamlines the product development process and drives faster time-to-market by helping manufacturers resolve design challenges, forecast real world product performance and test fewer prototypes.
Best-of-breed CAE software like ANSYS can nurture design innovation and enable faster delivery of more successful product offerings, but only if IT can scale to support a wide range of CAE applications and workloads. Continue reading →
Electric machines, power and electronic transformers and other devices can be better designed and analyzed using transient electromagnetic field simulation. This choice allows engineers to analyze the dynamic system including the non-linear materials, permanent magnets and induced eddy current under a variety of conditions, employing various excitations including the pulsed waveform. Continue reading →